Stainless Steel Bollard Covers – Discover Unique Insights..

Creating harmony in the middle of heavy foot or vehicle traffic is quite tough, particularly if you own a commercial building. This is often an issue in shopping centers, restaurants, or other crowded places, which explains why certain regulations are important for a more organised operation. But aside from these rules, additionally it is essential that you give people some visual signs of what these rules are, by means of stainless steel bollards so people will be made aware there are rules to be followed.

Bollards in public areas – Bollards are normally found in public places, and you may find parking bollards in streets with heavy traffic or facing buildings that require protection from vehicles. Some are even used instead of cycle racks. Others would even allow these bikes to become locked for security purposes.

When bollards are installed, it is actually mainly to reinforce safety. These are visual indicators that no unauthorised person is able to enter a place, that is often signified with the addition of a chain connecting the bollards. Which means that individuals are not allowed to get in the area that is certainly cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and have the choice of powder coating to any BS or RAL colour. Mild steel tube comes in varying thicknesses 60mm up to 114mm diameter have a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube is available in larger wall thicknesses to supply the ultimate safety barriers.

Of very low maintenance, steel requires only occasional cleaning with tepid to warm water and soap or even a mild detergent. In heavy industrial areas or regions of a higher amount of traffic bollards could be subject to more deposits, so that you can keep up with the desired finish a more frequent maintenance programme is recommended.

1800bollards.com Stainless Steel Bollard Covers

Areas requiring vehicle access during the day and need a secure and safe area during the night can utilise a telescopic bollard. The bollards use a light lifting weight, approximately 15kgs, and retract to ground level allowing for continued vehicle access. If the bollard is lifted and locked in put it provides high security towards the area, this design can also be manufactured in a thicker steel wall to supply anti ram resistance.

There are numerous materials employed to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be purchased with additional features, such as being sound sensitive or automated. Fixed bollards have light reflectors to permit people know where these are located, particularly the drivers. Minus the reflectors, they may easily cause accidents to take place within the streets.

Installing bollards, whether they are used as an alternative to get a bike stand or not, depends on what sort of bollards you might have chosen. Fixed bollards must be installed into concrete or with new foundations. Factors miecfq because the soil condition and design need to be carefully examined initially.

On the other hand, removable or manufactured bollards often have their mounting systems. Even when they have to become mounted on their own, no drilling is necessary to install these sorts of bollards. They don’t need to be glued to the ground either with epoxy or similar materials.

Retractable bollards are also offered. At first, they might seem like layered telescopes that can be used with manual or automatic features, according to your preference. Manual bollards must be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a comment

Your email address will not be published. Required fields are marked *